23 Products Found

HMDL-TO LOW PRESSURE VERSION. Same as HMD-TO above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).   HMD-V MID-FORCE NOZZLE 1.5" NH (38mm) Automatic with a flow capacity of 70-200 gpm (265-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. Rocker lug 1.5" NH (38mm) full-time swivel is standard.   HMDP-VPGI1.5 MID-FORCE 6 W/GRIP 1.5"BSP   HMDP21-030 MID-FORCE FO6 W/GRIP 2.0"BSPM   HMD-VPGISBIC MID-FORCE W/GRIP 2.5"BIC -SPINNING TEETH   HMDL-VS LOW PRESSURE VERSION. Same as HMD-V above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3bar).   HMD-TOS MID-FORCE TIP 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Tip does not shut off and must be used with a separate valve or valved playpipe. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. 1.5" NH (38mm) rigid rocker lug coupling is standard.   HMDL-VPGI LOW PRESSURE VERSION. Same as HMD-VPGI above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).   HMDL-STO LOW PRESSURE VERSION. Same as HMD-STO above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).   HMDP21-029 MID-FORCE FO6 W/GRIP 2.5"BIC   HMDP21-028 MID-FORCE FO6 W/GRIP 1.5"BSP   HMDL-V LOW PRESSURE VERSION. Same as HMD-V above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).   HMD-STO MID-FORCE TIP/TWIST-OFF 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (265-760 l/min). Includes patented twist slide-type valve for turbulence-free flow control, and flush without shutting down. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. May be used with a separate valve or playpipe. Ideal for break-and-extend operations. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. 1.5" NH (38mm) rigid rocker lug coupling is standard.   HMD-VPGI MID-FORCE W/GRIP 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (265-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. 1.5" NH (38mm) swivel rocker lug coupling is standard.   HMD-STOS MID-FORCE TIP/TWIST-OFF 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes patented twist slide-type valve for turbulence-free flow control, flush without shutting down, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. May be used with a separate valve or playpipe. Ideal for break-and-extend operations. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. 1.5" NH (38mm) rigid rocker lug coupling is standard.   HMDPI-2.5BIC MID-FORCE 6 W/GRIP 2.5"BIC MALE   HMD-VS MID-FORCE NOZZLE 1.5" NH (38mm) Automatic with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. Rocker lug 1.5" NH (38mm) full-time swivel is standard.   HMD-TO MID-FORCE TIP 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (265-760 l/min) and flush without shutting down. Lightweight hard coat anodized aluminum for maximum resistance to corrosion and wear. Tip does not shut off and must be used with a separate valve or valved playpipe. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. 1.5" NH (38mm) rigid rocker lug coupling is standard.   HMD-VPGIS MID-FORCE W/GRIP 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. Nozzle may be switched between standard 100 psi (7 bar) and low pressure. 1.5" NH (38mm) swivel rocker lug coupling is standard.   HMDL-VPGIS LOW PRESSURE VERSION. Same as HMD-VPGI above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).   HMDL-STOS LOW PRESSURE VERSION. Same as HMD-STO above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).   HMD-VPGI-BF MID-FORCE W/GRIP 1.5"BSP FEMALE EXTENDED   HMDL-TOS LOW PRESSURE VERSION. Same as HMD-TO above, but operates at lower pressures of approximately 75 psi (5 bar) / 45 psi (3 bar).